The Air Cell (Flexible Separator) is fitted inside a conservator tank, isolating insulating oil from the atmosphere, and thus preventing contamination of gas and/or moisture from coming into contact with the transformer oil due to oxidation and hydrolysis. The bag is vented on the transformer through flange type mounting such that it inflates or deflates to accommodate oil volume displacements due to changes in the transformer temperature.The Air Cells are manufactured using time tested combination of Nylon (Polyamide) fabric and a thick coating of Elastomers i.e. Acrylonitrile Butadiene Rubber (NBR), Polychloroprene (CR) and Hypalon (CSM) . The rubber compounds are so formulated, so as to minimize separator degradation and resist leakage of air through membranes thus reducing the amount of air in the transformer oil. Over a period of time this air/gases can reduce dielectric strength and thereby accelerate the aging of the insulation system.